MSD High Current Relay, SPST The SPST High Current Relay is rated at 30 amps with an input voltage of 12 volts DC. MSD's High Current Relays are what you need to activate accessories that draw high current. These Relays are very reliable due to the fully...

Window, RPM Activated Switch, MSD Window RPM Activated Switch These RPM-Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a desired rpm. The RPM-Activated Switch, PN...

Shift Light, LED LED Shift Light Plugs-in directly to all MSD ignitions for an instant Shift Light. Needs rpm modules to set the RPM. The MSD Shift Light will turn on to "remind" you to shift when the engine reaches your specified rpm. You select the rpm...

Switch Kit, RPM Activated RPM Activated Switch This Switch will supply then remove ground to a circuit. These RPM-Activated Switches will perform a variety of different functions from turning on a bulb or solenoid to activating an MSD Timing Control at a...

DIS COIL SIMULATOR Used on DIS-4 Plus Ignition and plugs into harness using the bullet connectors._x000D_ **Will not work on Coil-on-Plug Ford applications** Tach Adapters; simulate signal; DIS; distributorless; ignition adapter; EFI adapter; adapter;...

Tach Adapter, Magnetic Trigger Tach/Fuel Adapter Magnetic Trigger Installations or Current Triggered Tachometers If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need the PN 8920 Tach Adapter. The...

Tach Signal GMR Pickup MSD Tach Signal GMR Pickup Converts a low-voltage, high-current pulse to a clean 12-volt square wave with no wire splicing required. Just think of the things you can easily accomplish with our GMR Pickup! This little device simply...

Tach Driver, Distributorless Ignitions Distributorless Tach Driver Not for use on odd-fire engines. Ever wonder how you can install an aftermarket tachometer on a vehicle with no distribu

Tach Adapter, Electronic Ignition System Designed for current-limiting ignition systems (non-ballast resistor systems) If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The...

Tach Adapter For use on non-current limiting ignitions, originally equipped with a ballast resistor. If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will...

REPLACEMENT HARNESS FOR 62152/62 Replacement Harness; Harnesses; Replacement; Replacement Harness for 62152/62153 Multi-Channel Ignition Replacement Harness for PN 62152/62153, DIS 4, DIS 4 High-Output Trust MSD to provide quality replacement parts and...

Replacement Harness for 6425 & 6201 Replacement Harness; Harnesses; Replacement; Replacement Harness for PN 6201/62013 and PN 6425/64253 Replacement Harness for PN 6201/62013, Digital 6A and PN 6425/64253 Digital 6A-L Trust MSD to provide quality...