Ignition

Cable Assembly, Amp Female To Ford MSD to Ford Duraspark Adapter Harness Female AMP Pin to Ford Duraspark connector. This adapter cable allows you to plug your MSD 6 or 7 Series Ignition or Timing Accessory directly into a Ford Duraspark Connector...

Shielded Magnetic Pickup Cable, 10Ft 10 foot cable; shielded cable; shielded; mag pick up cable; mag harness; harness; 10 feet MSD Magnetic Pickup Cable - Shielded - 10 Foot Shielded Magnetic Pickup Cable Protects the Trigger Signal from Electromagnetic...

Harness, Replace 3-Pin, Rdy-to-Run Dist MSD MSD Wiring Harness - 3-Pin Replacement Harness for Ready-to-Run Distributors 3-pin Ready-to-Run Distributor replacement harness, stock length.

Shielded Magnetic Pickup Cable, 6' 6 foot cable; shielded cable; shielded; mag pick up cable; mag harness; harness; 6 foot; 6 feet MSD Magnetic Pickup Cable - Shielded - 6 Foot Shielded Magnetic Pickup Cable Protects the Trigger Signal from...

Module Bypass Cable, GM HEI For connecting MSD 6 or 7-Series Ignition or Timing Accessory directly into the magnetic trigger inside a GM HEI distributor. Adapts MSD Distributor to harness on GM Ignition, MSD 6M-2 PN 6460, MSD 6-Offroad PN 6470 or MSD 8...

Cable Assembly, 2 Wire, 6' MSD Cable Assembly - 2 Wire - 6 Foot Replacement Harness - MSD Ignition to Distributor or Crank Trigger If your mag pickup harness is worn out or burned, MSD offers this replacement. Use this harness to connect your MSD...

Harness Replacement, Digital 7 Prog Replacement Harness for Programmable Digital-7 Plus Replacement harness for PN 7531 Stock length harness for Programmable Digital-7 Plus.

Pro Race, High Temp Boots, 90 Deg.8/Card Pro Race, High Temp Boots, 90° 8/Card These spark plug boots are designed for extreme racing applications. Using a proprietary blend of materials, the boots can handle much higher temperatures over an increased...

PRO-CLAMP WIRE SEPARATORS MSD Pro-Clamp Separators The Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each Separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in...

Plug Wire Spacer Kit,16/Set,Wire Sleeves MSD Dual Plug Wire Separators, Set of 16 For use with wires with sleeve. MSD Wires Separators will clean up your wire installation and last the duration of your vehicle. Not only do separators have to keep spark...

Plug Wire Spacer Kit, 16/Set, 8-8.5mm MSD Dual Plug Wire Separators, Set of 16 For use with 8-8.5mm wires. MSD Wires Separators will clean up your wire installation and last the duration of your vehicle. Not only do separators have to keep spark plug...

Vibration Mounts, Blaster SS Coil MSD Vibration Mounts, for Part #8207/82073 Blaster SS Series Coil .44" x .50" 3 per Card, fits MSD Blaster SS Coil PN 8207 In many performance applications such as off-road, drag race, marine and oval track racing,...