Body

UNIVERSAL TACH CONVERTOR, MAGNETOS Universal Tach Convertor for Magnetos Converts the Pro-Mag's coil signal into a 12 volt square wave signal. The output signal that is used to trigger magnetos differs from a conventional electronic ignition system. The...

Shift Light Digital Prog ON/OFF 1-12 Cyl Programmable Digital Shift Light, Single RPM Point Supplied with a GMR Pickup, PN 8918, to make installation even easier on diesels, points, coil-on-plug and most any application! The most universal and easy to...

Shift Light, Digital, Prog. 1-12 Cyl. Digital Programmable Shift Light Supplied with a GMR Pickup, PN 8918, to make installation even easier on diesels, points, coil-on-plug and most any other application! The most universal and easy to use shift light...

Shift Light, LED LED Shift Light Plugs-in directly to all MSD ignitions for an instant Shift Light. Needs rpm modules to set the RPM. The MSD Shift Light will turn on to "remind" you to shift when the engine reaches your specified rpm. You select the rpm...

DIS COIL SIMULATOR Used on DIS-4 Plus Ignition and plugs into harness using the bullet connectors._x000D_ **Will not work on Coil-on-Plug Ford applications** Tach Adapters; simulate signal; DIS; distributorless; ignition adapter; EFI adapter; adapter;...

Tach Signal GMR Pickup MSD Tach Signal GMR Pickup Converts a low-voltage, high-current pulse to a clean 12-volt square wave with no wire splicing required. Just think of the things you can easily accomplish with our GMR Pickup! This little device simply...

Tach Driver, Distributorless Ignitions Distributorless Tach Driver Not for use on odd-fire engines. Ever wonder how you can install an aftermarket tachometer on a vehicle with no distribu

Tach Adapter, Electronic Ignition System Designed for current-limiting ignition systems (non-ballast resistor systems) If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The...

Tach Adapter For use on non-current limiting ignitions, originally equipped with a ballast resistor. If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will...

MAGNETIC SIGNAL STABILIZER MSD Magnetic Signal Stabilizer Signal Convertor - From Magnetic Pickup to Square Wave Trigger The stabilizer converts the signal from a magnetic pickup to a square wave trigger signal for the MSD Ignition control.

TACH DRIVE ADAPTER, TANG TO SQUARE D Tach Drive Adapter Tang to Square Drive Adapter. The standard tach drive for MSD Tach Drive Distributors is a 3/16" tang drive cable. In most cases this type of drive will work, but for those who require the 0.104"...

Black, Power Grid Power Module Power Grid Power Module - Black When connected to the Power Grid it will data log all the functions including Time from Launch, time or rpm of activation and deactivation. The MSD Power Module is a fully programmable, four...