Hardware, Fasteners and Fittings

DIS COIL SIMULATOR Used on DIS-4 Plus Ignition and plugs into harness using the bullet connectors._x000D_ **Will not work on Coil-on-Plug Ford applications** Tach Adapters; simulate signal; DIS; distributorless; ignition adapter; EFI adapter; adapter;...

Tach Adapter, Electronic Ignition System Designed for current-limiting ignition systems (non-ballast resistor systems) If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The...

Tach Adapter For use on non-current limiting ignitions, originally equipped with a ballast resistor. If you are triggering an MSD 6 or 7-Series Ignition with its white wire or points terminal, you will need the PN 8910 Tach Adapter. The PN 8910 will...

TACH DRIVE ADAPTER, TANG TO SQUARE D Tach Drive Adapter Tang to Square Drive Adapter. The standard tach drive for MSD Tach Drive Distributors is a 3/16" tang drive cable. In most cases this type of drive will work, but for those who require the 0.104"...